We are excited to introduce the Portland Razor Co. Professional Line Straight Razors! The Professional Line Straight Razors can be fully sanitized due to their unique blade and scales materials, improvements which make them the ultimate shaving tool for professional barbers and stylists. We believe that conventional straight razors not only out-perform disposable razors in many categories, they also offer a waste-free solution to practitioners in search of green alternatives.
The Problem
" --In reality, conventional straight razors can be used in most states with proper sanitary technique."
For decades, disposable razors have been commonplace in shops across the United States. Used properly, disposable blades are perfectly safe and sanitary. That said, blade changes take time, pose an added risk to the professional handling them, often barbers will have to throw out unused blades because they are simply not sharp, and they end up in our landfills as hazardous waste. Students are often told in barber school that there is no alternative, that conventional straight razor use is illegal or unsafe. In reality, conventional straight razors can be used in most states with proper sanitary technique. (We have checked rules & regs in many states including OR, CA, WA, PA, FL, TN, NY, NJ… In fact, the only state we have confirmed prohibits Conventional Straight Razor Use is Rhode Island!)
Even knowing the proper sanitary technique is not enough, unfortunately. Existing razor manufacturers never changed their design or materials to keep up with evolving requirements. For example, all sharp implements which may come in contact with the skin must be fully immersible in a high-level disinfectant. This means the whole razor, scales and all, must be fully immersed to be sanitized. Products like Barbicide do a very good job of destroying organic matter, which makes them great for killing contagions (yay!) and bad for plastics, wood, horn… everything traditionally used to make razor scales. It’s also brutal on most blade steels, causing rust or deformation of the edge.
With these problems in mind, we were ready to get into the shop and find the solution.
Design Process
Our first and most obvious task was to find materials that are easily sanitized. Our Cascade Steel has the perfect chemistry and edge-retention characteristics to survive prolonged exposure to Barbicide with little to no change in sharpness or surface finish. It’s also easier to clean and maintain than carbon steel blades(such as our O1 razors from our Classic and Artisan lines) without sacrificing cutting performance.
With the blade accounted for, the scales posed our next challenge. We wanted something durable, non-reactive with Barbicide, and easy to work with. This meant metal was out of the question, being either too flimsy or too heavy for our purposes. We settled on resin-based materials, being widely available, lightweight, and easier to work with. After exhaustive testing, we went with a high-impact, chemical-resistant fiberglass and resin composite.
In thinking of how professionals tend to put more mileage on their tools than hobbyists, we decided to upgrade the rest of the hardware while we were at it. Stainless pins and washers replaced the usual brass, making the razor more durable overall.
Once we found all the appropriate materials, we began vigorously testing them in a real-world environment: Portland Shave Shop. Each of our barbers was equipped with a prototype razor, instructed on its care and use, and given license to test them however they saw fit.
It makes sense that a razor designed for use on one’s own face might not be ideal for shaving others. The barbers would work with the razors for a few weeks and come back to us with their feedback, and we would take the razors into the shop for modifications. We started from scratch more than a few times, deciding that we needed two different razors to tackle most jobs in the barbershop. The resulting designs were worth the effort. They come with some obvious changes, a few less-so: we extended the jimps and made them barely deeper to improve grip, and the overall length of the razors was shortened so they would fit in sanitation jars from common manufacturers. The taper of the tang and balance point of the blade were altered to make the razor more comfortable in pinch grips and when held back-handed, grips more common in the barbershop than in the bathroom at home.
Performance
The barbers testing our razors had great feedback. The first thing usually had to do with tactile feedback, or how they could feel the hair and skin by holding the razor. Picture a disposable-blade razor for a moment; a thin piece of metal (the blade) is inserted into a metal or plastic housing with several moving parts, and is fastened together with pins, springs, or magnets. This creates several degrees of separation between the hair being cut and the hand of the barber. All that plastic and hardware absorbs the force of the hair against the blade and it never makes it to the barber’s hand! By contrast, conventional razors are a single piece of steel with only one degree of separation between the client's hair and the barber's hand. This results in an immediate difference in how much the barber can feel on the skin through the razor, allowing them to make adjustments on the fly more naturally than with a disposable blade. This has resulted in fewer nicks, closer shaves, and greater overall comfort for the client.
Second, conventional razors tend to be less aggressive. While some may see this as a drawback, most find that it allows them to give a closer shave that is less irritating to the client’s skin. Our theory is this: you want a razor that is sharp enough to cut the hair with no resistance, but not so sharp that it removes more than the topmost layer of dead skin. The blade should pass effortlessly through hair but glide over the surface of the skin without irritating it.
Third was ease of maintenance. Cleanup is a cinch thanks to the stainless blade, as the whole razor can be rinsed under running water without fear of rust. Sanitation is also simple as with any other sharp in a barber’s toolkit. Because the blade steel and scales materials are non-reactive, they can be fully immersed in Barbicide Plus--or other high-level disinfectants--without the material deteriorating or harming performance. One drawback of course is the need to strop, but this is far outweighed by the benefits of a non-disposable blade. Once the technique is mastered, stropping can be done at the chair while the client is enjoying a hot towel or while your next razor is resting in disinfectant, allowing you to multitask.
On the topic of stropping: we find the edge is durable enough to forego stropping between every client if the blade is only used for neck shaves. Basic lineups don’t seem to put as much wear on the blade, so barbers in busy shops need not take the few extra minutes between clients to strop; only sanitizing is necessary.
Finally, there’s nothing to throw away. We care about our planet and our impact on it, so finding ways to reduce waste is important to us. Switching to conventional straight razors at Portland Shave Shop has allowed us to do away with disposable razors entirely, meaning we both generate less waste and help our barbers save time and money.
1.75-inch Professional Straight Razor // "The Lineup"
With a shorter blade and a familiar profile, this razor is ideal for line ups and detailed razor work around the ear, or in creative cuts. The blade still has enough weight behind it for a full face shave, but if you are a specialist and are shaving faces every day, we recommend the 2-½” model.
2.5-inch Professional Straight Razor // Barber Special
This razor most strongly resembles the vintage blades used in barbershops for over 100 years, and brings traditional barbering hurdling into the 21st century. Longer than the Line Up razor, this blade is for barbers whose practice is built around the traditional straight shave. The added surface area allows you to make more strokes before wiping the blade, and the added weight carries the blade through whiskers with less effort.
specs
- Handmade in Portland, OR
- 5/8 Round Point Straight Razor
- 2-1/2" cutting edge
- Can be fully submerged in high-level disinfectant
- Durable scales
- Stainless pins and washers
- Lower and Upper Jimps for Added Grip and Control
- Quarter-Hollow Ground Stainless Cascade Steel
- Hardened to 62 HRC
- Shave-Ready: Hand-Honed to 12K grit and Stropped Before Shipping
- Pinned by Hand
