The Top 5 Reasons to Shave with a Straight Razor

Wondering if shaving with a straight is right for you?

Straight shaving can have a meaningful impact on your physical, emotional, and financial well-being while reducing your impact on the environment. By deciding to become a straight shaver, you are resolving to take back control of your shave, transforming a loathsome chore into an enjoyable, empowering ritual. Here are our top 5 reasons you should be shaving with a straight razor.

top 5 reasons to straight razor shave

Portland Razor Company’s TOP 5 REASONS TO SHAVE WITH A STRAIGHT RAZOR

1: Straight Shaving is Good For Your Skin.

Gentle exfoliation, like the kind you get from straight shaving and using a shaving brush, can be great for skin health. Exfoliation removes the topmost layer of dead skin cells and promotes new cell growth, collagen production, and improved circulation. Shaving with a straight razor and applying lather with a shaving brush are two great ways to add this kind of beneficial exfoliation to your shaving routine. The brush lifts hair and dirt off the skin while applying lather and moisture, and provides the most gentle exfoliation. The straight razor clears dead cells, dirt, and lather away in one clean stroke, and your technique can be modified to provide a more or less aggressive shave.
Straight shaving is cleaner than shaving with cartridge or electric razors, reducing the risk of common skin infections like ingrown hairs, razor burn and razor bumps. Safety bars, lubricating strips, multiple blades and motors are difficult to clean and can clog with hair, skin, soap, and dirt. This can cause the blades to rust, become dull, and grow harmful bacteria which increase the risk of these aforementioned infections. A quality straight razor made with high carbon steel and proper heat treatment will take and hold a sharper edge over cheap stainless blades, and can be cleaned between each and every pass, making for a sharper, cleaner, closer shave.

2: Straight Shaving is Good for Your Brain.

Learning new skills that use both hemispheres of your brain--this study suggests digital photography or quilting--improves cognitive function, memory, and coordination. The catch is: you have to keep learning new skills to continue receiving these benefits. You can get started with straight shaving knowing only the basics of shaving and stropping, but there are many learning opportunities within the world of straight shaving. Learn to hone your straight razor, build the perfect lather, set your razor into some primo scales. While we are happy to do some of these things for you, we think you will enjoy performing them yourself once you get your feet wet -- why should we be the ones to have all the fun?
Many use straight shaving as an opportunity to meditate, which has been shown to lower stress and boost your immune system. Folks who practice this type of meditation in the morning claim that it sets them up for a more productive day. Evening shavers benefit, too! Performing an analog task like meditating or straight shaving an hour before bed--especially as part of a routine--instead of being sedentary in front of a glowing screen makes it easier to fall asleep, and improves the quality of your sleep.

3: Straight Shaving Saves You Money.

A well-cared-for straight razor should provide a lifetime of shaves and save you hundreds of dollars each year! Some savings are pretty obvious, like never needing to buy refills, sign up for a subscription, or drive to the store for blades ever again. But straight shaving saves you money in less obvious ways, too. It reduces the amount of waste you create, which in turn decreases your waste disposal bill. Harder to measure--but even more important--is the reduced pressure on landfills, which are expensive to construct, fill, and close; never mind the cost of environmental cleanup as a consequence of poorly-constructed or improperly-sealed landfills!
You can enjoy all of these savings even after accounting for startup costs and recurring costs for sharpening services! The key to getting the most out of your straight razor is in taking care of it: keeping it dry, stropping it properly, and having it honed when necessary will reduce wear and prolong its usable life to further extend your savings, even into the next generation. Long-term costs can be reduced further by purchasing a good stone and learning to hone your straight razor on your own.

4: Straight Razors are Good for the Environment.

Straight shaving is a zero-waste solution. With nothing to buy or throw away, it’s the best shaving method for the environment and a simple way to reduce your carbon footprint. Every year, 68 million American men throw away 2 billion disposable razors, generating 34 million cubic feet of hazardous, non-recyclable waste. This adds to 250+ million tons of new trash, 13% of which is plastic. In short, making the change to straight shaving is a meaningful step for the environmentally-conscious.
You can improve the environmental impact of your other shaving and grooming goods as well. We recommend natural, sustainable products from responsible sources, like those made by our friends at Craftsman Soap Co. From the Craftsman Soap Co website:

“We use recyclable packaging, post-consumer recycled papers and soy inks, and have always made our products free of palm oil because of its reputation for destructive farming practices. Coconut oil, shea butter, and cocoa butter together create an alternative to palm oil that we believe creates a richer, fuller lather and a better bar of soap.”

5: As a Straight Shaver, You Have Control.

Straight shaving gives you total control over your shaving experience. While most razors are made one-size-fits-most, the straight razor is truly flexible. Sensitive skin? Curly hair? Kevlar growing out of your face? Your technique, angle and pressure can be modified for the ideal shave without having to change products or pay extra, and being able to take care of your own straight razor lets you know for sure that it is clean and sharp before every shave. A straight razor is a product that will treat you well if you treat it respectfully and responsibly, and taking good care of it will prolong its life and improve the quality of your shaves for years to come.

Other Sources Cited:
"Municipal Solid Waste (MSW) in the United States: Facts and Figures." EPA. Environmental Protection Agency, n.d. Web. 30 Dec. 2014.
Clarke, Arthur C. "Solid and Hazard Waste." Solid and Hazard Waste. N.p., n.d. Web. 30 Dec. 2014.

Shortened Lead Times, New Location

We are proud to announce that our lead time on straight razor orders is now only three to four weeks!

Yes, you read that correctly. Our straight razor backorder is weeks, not months.

Making Straight Razors in SW Portland

This efficiency increase can be almost entirely attributed to the setup at our new workshop. In February we began the search for a larger, more permanent space in which to make our straight razors and strops. Thanks to the venerable Kelley Roy, owner of ADX, we were directed to the building we now call home. The former cabinet shop, located just a few blocks south of Downtown Portland, recently changed ownership and is currently being renovated to house other Portland Makers. We are fortunate enough to be the first tenants in the building and look forward to meeting our future neighbors. It took a few sleepless weeks of dust masks, epoxy paint, and bribing our dads to help us out, but we are very pleased with our new 1200 square-foot space!

Straight Razor Production Upgrades

Easily the most exciting result of our move: production is faster than ever! Lead times on our straight razors are currently three to four weeks, down from three to four months this time last year. The new shop affords us space to layout our straight razor manufacturing process and allowed us to invest in more sophisticated equipment. Much of what we’ve learned comes directly from sharing ideas with fellow makers (it is just better when you work together!). I hope other makers and creatives can learn from our experience. In no particular order, here are some of my favorite upgrades we have made to our shop to improve our straight razor output:

  • Organization. One of the big selling points for the new shop is the natural, logical division of space. The warehouses we looked at prior to finalizing our decision were open-layout and would have been more effort (read: más money!) to build out. It also allowed us to separate ‘clean’ and ‘dirty’ operations, improving overall quality control. Believe me, there’s nothing worse than finding steel dust from grinding razors on your half-dried wood finish. Having these divisions in place also means we can set up our old work benches and optimize them for specific tasks. Which helps create…
  • Orderliness. Far better than our old multi-multi-multi-purpose work table, each step in our straight razor production process has a dedicated station. Raw steel waits by the door to go to waterjet, straight razor blanks go by the grinders. Scales materials stay by the laser-cutter and laser-cut blanks are stored on the assembly station. We have a sink dedicated for sharpening straight razors and an anvil on a stand closeby for assembling a straight blade into scales immediately after. Leather and poly-webbing are stored inside our sewing table and strop hardware is within an arm’s reach. Relevant tools are stored at each station, and each station has its own set of tools. This one was especially helpful to me, since I tend to forget where I set things down.
  • Visual Inventory. This ties in with having dedicated stations for each step. Visual inventory just means that all materials and parts are prominently on display. This lets you know when you need to make more of something or order more material. One forgets how quickly you go through 500 brass washers until you’re down to 5 and you really, really need 6 of them...
  • Batch Production. Straight razors in production are done in batches of four and travel in a box from station to station. The order number, straight razor model, straight razor scales material, and other straight shaving add-ons in the order are printed and slipped into a cardholder on the lid of each box. This way, we always know exactly what needs to be done to complete an order. This saves time mapping out our day, we don’t check the master list as often, and assures that orders are constantly going out the door rather than languishing at a particular station for days. The 4-8 straight razor batch size seems to be our sweet spot, being able to move quickly while guaranteeing standards of quality are met at each step.
  • Automation. We have invested in a few pieces of equipment that have majorly slashed our production time. We have written before about using our Laser Cutter and Thermark to brand our razors. Our Laser Cutter also cuts templates, cuts prototype parts, and engraves our straight razor boxes. Being able to cut out a custom part in seconds is a very powerful thing if you know your way around CAD. We also purchased a clicker press. It is basically a terrifying cookie cutter. Before the clicker press, we would painstakingly cut out strop pieces by hand: first the basic shape with a rotary cutter, then the internal corners with a chisel, then the hardware holes with a hand punch. The clicker press makes very quick work (about 2 seconds!) of cutting out our strop components.
  • Error Proofing/Quality Control. Bad things happen fast, good things happen slowly. Having quality control steps built into the straight razor production process helps us achieve balance in making the best straight razor or strop possible, while getting it out the door in a reasonable timeframe. Work at every station starts and ends with a quality control step to guarantee that every batch of straight razors and strops meets our high standards. Each batch passes through multiple hands between steps, getting fresh eyes on the product and catching errors well before it gets to final assembly. If a straight razor doesn’t look exactly right, it’s far better to stop the line and take it back a step than to try and fix it after everything has been put together
  • Friday, Fun Day! We dedicated our Fridays to shop improvements, process innovations and experiments for a couple reasons.
    • First, it forces us to finish projects outside of normal straight razor production- things that are too new or risky for a normal day. This can be hanging a bike rack, setting up garbage and recycling systems, setting up lighting for our product photography corner, or nabbing great stuff from free piles around Portland (our huge cutting table was rescued from it’s destiny in a landfill on the corner of SE 3rd and Morrison). Other projects usually take the form of custom straight razors that require developing new techniques or build on our existing skillset. Each of these straight razors is a unique work of art unlike anything in our production line. These have resulted in some of our best work so far, and can be seen on our in-stock customs page.
    • Second, it helps us grow. Decorating a retail space, fabricating a new straight razor display, programming the laser-cutter, experimenting with gold plating… every project presents a challenge and an opportunity to learn. They frequently take a left turn and become something completely different from what we imagined, but that’s another fun part of the the process and why we insist on making time for it. You never know what might come of it!
    • Third, it keeps things fresh and interesting. The core straight razor production process--though much refined--has remained largely unchanged over the past three years. Although I’ve gotten much faster and more consistent at it, surface grinding my 500th straight razor felt a lot like my 50th… it’s hot, sweaty, dirty work. Knowing I get to try something new at the end of the week is a great motivator for me when work starts feeling repetitive.
    • In Short: It’s a fun way to grow individually and as a company, constantly improving and staying relevant.

I’m sure a lot will change in the coming years, but I can say with confidence that it will only get better. The focus has always been--and will continue to be--on making the best American-made straight razors we can and providing you with essential straight shaving knowledge.

With a bit more time on our hands, I’ll be attempting to create more content for the blog, videos, and tutorials. Keep your eyes open here and subscribe to our YouTube channel for updates. If you’d like to see a blog post or a video about something, let us know in the comments!

Follow, like, subscribe!
Youtube

Instagram

Facebook

 
In our last shop, this work table was used for scales assembly, finishing scales, razor assembly, razor honing, etching straight razors, packaging finished razors, shipping, and sometimes eating lunch.  Now it is dedicated to packaging and…

In our last shop, this work table was used for scales assembly, finishing scales, razor assembly, razor honing, etching straight razors, packaging finished razors, shipping, and sometimes eating lunch.  Now it is dedicated to packaging and shipping.  

 
 
straight razor blog july 206 1

Cancer Free!

I haven't given you guys an update for a while even though a lot has happened since the last update! 

I'll start with all of the good news.  The doctors were able to successfully remove all of the tumor masses that they wanted and currently I am cancer free!  In other good news, I am home from the hospital and am on the road to a full recovery.

Unfortunately I did not make it to this point without a bit of struggling. I had some major post-op complications and my estimated 10 day hospital stay turned into a 45 day hospital stay. Sparing you the gritty details, I was unable to eat or drink the entire time at the hospital, and am only now beginning to transition to eating again. For the last 2 months I've been getting all of my nutrition through IV. Yea, it's about as exciting as it sounds. Anyway, now I'm dealing with a bunch of muscle atrophy and living life with a few too many tubes going in an out of my body. 

With any luck, I'll have the tubes removed and be moving around like normal very soon. I missed eating Thanksgiving dinner this year, but I'm just thankful that I'm still here and mostly I'm thankful for all my friends and family who have supported me through all of this. I hope you all had a great Thanksgiving and thank you again for everything!

Best,

Scott